Manuals / Craftsman / Lawn and Garden / Pressure Washer

Craftsman 919.763010 owner manual To Start Your Pressure Washer

Models: 919.763010

1 56
Download 56 pages 16.16 Kb
Page 10
Image 10

IMPORTANT: It is important to prevent gum deposits from forming in essential fuel system parts such as the carburetor, fuel filter hose or tank during storage. Also, experience indicates that alcohol-blended fuels (called gasohol or using ethanol or methanol) can attract mois- ture which leads to separation and formation of acids during storage. Acidic gas can damage the fuel system of an engine while in storage. To avoid engine problems, the fuel system should be emptied before storage of 30 days or longer. Never use engine or carburetor cleaner products in the fuel tank or permanent damage may

Occur.

NOTE: Never start pressure washer without water source turned on and connected to pressure washer.

To Start Your Pressure Washer

Make sure fuel shutoff valve is turned to the open position. Turn couner-clockwise to open,

•Remove gas cap.

•Add unleaded gasoline, slowly, to fuel tank.

•Do not overfill.

•Connect garden hose to the water inlet on the

pressure washer. Tigthen by turning water inlet counterclockwise.

•Connect high pressure hose to discharge on pump.

•Connect the garden hose to the water spout

and turn water supply on.

•Squeeze trigger on pressure washer wand to relieve air pressure caused by turning on the water. Water will spew out of the gun in a thin stream. This will make it easier to start the engine.

•Engage the safety latch on the spray gun. This locks the trigger in place and keeps you from accidentally spraying a high pressure stream.

SAFETY

I_ATCH

•On the engine there is a choke/run lever. Place lever to the choke position.

•On the engine there is a throttle control lever. Place

throttle to the rabbit position. Always start engine with throttle in the rabbit position,

•Grasp the starter grip and pull slowly until resistance is felt, then pull firmly to start engine.

•Grasp the starter grip and pull slowly until resistance is felt, then pull firmly to start engine.

•When engine starts, gradually move choke lever to RUN position.

•If engine does not start after 5 pulls, place choke back to run postion,

•For hot engine starts make sure choke lever is in the run positon. Make sure fuel shut off valve is open and throttle is in the rabbit position.

NOTE." If any leaks are present shut unit down and tighten fittings,

10

Page 9 Page 11
Page 10
Image 10
Craftsman 919.763010 owner manual To Start Your Pressure Washer
Page 9 Page 11

919.763010 specifications

The Craftsman 919.763010 is a versatile and reliable air compressor designed for both professional and DIY users. This model is noted for its robust construction and user-friendly features, making it an essential tool for a wide range of applications, from powering pneumatic tools to inflating tires.

One of the main features of the Craftsman 919.763010 is its impressive performance specifications. It typically boasts a tank capacity of 6 gallons, which is ideal for a variety of tasks. The compressor's maximum pressure is generally rated at around 150 PSI, allowing users to operate tools that require higher pressure levels efficiently. This means you can power nail guns, spray painters, and air wrenches without worrying about the compressor running out of power.

The Craftsman 919.763010 is powered by a 1.5-horsepower motor that ensures reliable performance. It features an oil-free pump, which significantly reduces maintenance requirements while ensuring that you can use it in various settings without the concern of oil spills. This is particularly useful for indoor applications where cleanliness is a priority.

One of the standout technologies incorporated into this model is its low noise operation. Typically producing around 78 decibels, it is quieter than many other compressors in its class, making it suitable for home use where noise might be a concern. This makes it user-friendly as it minimizes disturbances, whether you are working on a home improvement project or engaging in hobby work.

The Craftsman 919.763010 also features a convenient design with a lightweight body, which enhances its portability. With rubber grip handles and a sturdy wheel base, moving it around the job site or storage is hassle-free. Additionally, the quick-connect air fittings allow for easy setups, letting users switch between different air tools rapidly.

In terms of safety, this compressor often includes essential features like thermal overload protection, preventing the motor from overheating, further enhancing its longevity. The overall build quality reflects a commitment to durability, making it a worthwhile investment for users who require a reliable air compressor for various applications.

Overall, the Craftsman 919.763010 stands out as a well-rounded air compressor, balancing power, efficiency, and convenience, making it a recommended choice for both amateur and professional users alike.