Parts & Features
See figures below for reference.
Check Valve
When the pump is not in operation the valve closes to retain air pressure inside the tank. An internal component.
Quick Connect
Offers a quick release feature for attaching and removing the air hose.
Regulator Gauge
Indicates the outgoing air pressure to the tool and is controlled by the regulator.
Regulator
The air pressure coming from the air tank is controlled by the regulator. To increase the pressure turn the knob clockwise and to decrease the pressure turn the knob counterclockwise.
Pressure Switch
This controls the power to the motor and also the
Tank Safety Valve
Used to allow excess tank pressure to escape into the atmosphere. This valve should only open when the tank pressure is above the maximum rated pressure.
Pressure Relief Valve
The pressure relief valve located on the side of the pressure switch, is designed to automatically release compressed air when the air compressor reaches
Pressure Relief Tube
Air Intake Filter
Provides clean air to the pump and must always be kept free of debris. Check on a daily basis or before each use.
Tank Drain Valve
Used to drain condensation from the air tank.
Located at bottom of tank.
Tank Pressure Gauge Indicates the reserve air pressure in the tank.
Outlet Tube
Oil Fill Cap
Oil Sight Gauge
3
