Parts & Features
See figures below for reference,
indicates the reserve air pressure in the tank. I Tank Pressure Gauge
Regulator Gauge
indicates the outgoing air pressure to the tool and is controlled by the regulator.
Quick Connect
Offers a quick release feature for attaching and removing the air hose.
Regulator
The air pressure coming from the air tank is controlled by the regulator,
To increase the pressure, turn the knob clockwise and to decrease the
pressure turn the knob counterclockwise,
f
Provides clean air to the pump and must always
be kept free of debris. Check on a daily basis or
Air Intake Filter} before each use.
@ | Oil Fill Cap |
Tank Safety Valve
Used to allow excess tank pressure to escape
valve should only open when the tank pressure is above the maximum rated pressure.
Pressure Switch
This controls the power to the motor and also the
Pressure Relief Valve
The pressure relief valve, located on the side of the pressure switch, is designed to automatically release compressed air when the air compressor reaches
only escape momentarily and the valve should then close.
Pressure Relief Tube
Check Valve
When the pump is not in operation, the valve closes to retain air pressure inside the tank. An internal component.
Sight Gauge
Tube
