ABBOTT 52” PLASMA MOUNTING PANEL

SAFETY MOUNTING INSTRUCTIONS

This plasma mounting panel is intended for placement against a wall using the enclosed anchoring hardware. The included hardware is for mounting the unit to drywall. Use hardware appropriate to your wall type.

For added safety and stability, it is recommended that the wall mounting hardware be installed. For safe mounting, it is essential to use wall anchors appropriate to your wall type (i.e. plaster, drywall, concrete, etc.). Mount to wood studs whenever possible.

A.Insert wall screw (not included) through end of wall strap and into wall as shown.

B.Insert wall screw (included) through end wall strap and into the top back of unit as shown.

Mounting assembly is now complete.

NOTE: If you are unsure about your wall type or what mounting method you should use, consult a qualified professional or your local hardware store.

NOTE: Insert screws 3/4"-1" from the edge of the strap

WALL

wall

strap wall screw

wall screw

(NOTE: Additional screw not included. Please consult your local hardware store.)

CLEANING AND CARE

Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Do not use furniture wax or polish as the wood is finished with a protective clear lacquer.

NOTE: Contact your television manufacturer to find out the necessary wall mounting bracket and instructions needed to safely mount your TV. Crate and Barrel drivers are not authorized to mount your TV.

Made in China - r03

Customer Service 800.967.6696 Latest instructions available at www.crateandbarrel.com

Page 2 of 2