Crate & Barrel Abbott Bed CLEANING AND CARE, and, into, bolts, Insert, Attach, screws, counter-clockwise, www.crateandbarrel.com, Assembly is now complete, phillips head screwdriver

ABBOTT FULL, QUEEN OR KING BED

NOTE: Do not over tighten the bolts

1Insert 4 wood dowels into headboard and foot- board. Fit dowels of headboard and footboard into left and right side rails, and attach each bracket with

2bolts, 2 spring washers, 2 flat washers as shown. Secure, but do not over tighten, bolts with an allen wrench.

2Attach 2 center support legs to center support rail as shown. Turn support legs counter-clockwise to secure. Fit center support rail assembly onto brackets of headboard/footboard, and press down firmly to secure.

CLEANING AND CARE

Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Do not use furniture wax or polish as the wood is finished with a protective clear lacquer.

NOTE: Do not over tighten the screws

3Place slat assembly onto side rails and attach with

4screws. Make sure straps of slat assembly are facing up. Secure, but do not over tighten, screws with a phillips head screwdriver.

Assembly is now complete.

Made in Vietnam - r04 Customer Service 800.967.6696 Latest instructions available at www.crateandbarrel.com Page 2 of 2