Crate & Barrel Abbott Two-Door Cabinet cams, cam screws, front frame, wood dowels, bottom panel, 3A) Attach bottom panel with 6 large screws as shown

ABBOTT TWO-DOOR CABINET

1Insert 2 wood dowels into left and right side panels as shown.

NOTE: Do not over tighten the bolts

2Fit dowels of left and right side panels into corre- sponding holes of fixed shelf as shown. Secure each side panel with 2 bolts, using a phillips head screw- driver. Do not over tighten the screws.

NOTE: Make sure arrows on each cam point toward nearest edge with holes

B

A

3A) Attach bottom panel with 6 large screws as shown.

B) Insert 3 cams into bottom panel as shown. Make sure arrows on each cam point toward nearest edge with holes.

NOTE: Do not over tighten the cam screws

4Place front frame face down onto a clean, padded surface as shown, and insert 10 wood dowels and 3 cam screws. Secure, but do not over tighten, cam screws with a screwdriver.

Made in China - r06 Customer Service 800.967.6696 Latest instructions available at www.crateandbarrel.com Page 2 of 5