ACADEMY QUEEN, KING BEDS
Small
Washer
Large
Washer
Large Screw
A
Small
B 
Washer
Small
Screw
2Align holes in side rails with corresponding holes in footboard. Attach with 2 large screws, 2 small washers and
2large washers per side rail. Fully tighten with allen wrench.
3A. Attach 2 support legs to underside of center rail with
2small screws and 2 small washers per leg.B. Place center rail into position and attach from below with at the headboard and footboard with 2 small screws and
2small washers.A
x 28
B
4A. Fit 1 side slat fitting on one end of each slat. B. Align pegs on underside of side slat fittings with corresponding holes on side rails and fit each into position.
Made in China 2004
x 14
5Insert each open slat end into either side of the center slat fitting. Fit pins of each center fitting to corresponding holes in the center rail. Repeat until all slats are securely engaged in each fitting. Assembly is now complete.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners.
Page 2 of 2
Customer Service