ADD CD WALL SHELF

A

NOTE: Wipe excess glue with a damp cloth.

NOTE: Do not over tighten the bolts.

B

1A) Apply glue sparingly into holes provided on end caps. Insert 4 plastic dowels into each panel. Gently tap dowels with rubber mallet to secure. Wipe excess glue with a damp cloth.

B) Insert 2 connecting bolts into vertical panels. Secure bolts with a Phillips head screwdriver, but do not over tighten.

2Apply glue sparingly into holes provided on vertical panels. Fit vertical panels into top cap and bottom cap, by aligning holes with corresponding plastic dowels. Gently tap assembled panels with rubber mallet to secure.

3Apply glue sparingly into holes provided on top horizontal panel and bottom horizontal panel. Fit side caps into top horizontal panel and bottom horizontal panel. Gently tap assembled panels with rubber mallet to secure.

AB

4A) Locate the assembled unit with 4 connecting bolts on the vertical panels. Attach back panel to assembled unit as shown, by aligning the corresponding holes with connecting bolts.

B) Use a Phillips head screwdriver, turn built-in cams located on back panel clockwise until it securely engages each connecting bolt.

Made in Thailand R05

Customer Service 800.967.6696 www.crateandbarrel.com

Page 2 of 4