ALDEN STORAGE BENCH
x 3 
2Carefully attach assembled unit to back panel with 3 large bolts, 3 spring washers, and 3 large washers. Fasten using Phillips head screwdriver.
3Carefully slide top panel into groove provided on back panel. Do not fasten top panel until both side panels are attached.
A
x 8
B
x 4
4A) Fit right and left side panels and bottom panel onto wood dowels of assembled unit. Secure side panels with 8 large bolts, 8 spring washers and 8 small washers.
B) Flip assembly over. Secure bottom panel to assembly with 4 large bolts, 4 spring washers and 4 large washers. Secure all bolts with a Phillips head screwdriver.
Made in China R06
x 2
5With the assistance of another adult, place unit upright. Open top panel and attach 2 top supports with 4 small screws per support as shown.
Assembly is now complete.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners.
Page 2 of 2
Customer Service