ALDEN FOUR-DRAWER CHEST

2Fit front frame into position, aligning dowels in side frames with corresponding holes in front frame. Secure from the inside with 4 bolts per side frame. Do not fully tighten the bolts.

A

NOTE:

 

 

Do not over tighten

 

the screws.

B C

4A. Fit left drawer side onto drawer back dowels as shown. Attach with 3 screws and fasten with a phillips head screwdriver. Do not over tighten the screws.

B. Attach drawer front to drawer side with 3 screws. C. Slide drawer bottom into slot at bottom of drawer back, side and front.

D. Repeat Steps A-C for remaining 3 drawers.

Made in Thailand - r04

3Fit top panel into position, aligning dowels in side frames with holes in top. Attach top with 11 bolts. At this point, fully tighten all bolts installed in Steps 1 & 2 with the allen wrench.

B A

5A. Attach right drawer side to drawer back and front with 6 screws.

B. Attach each drawer pull with 1 pull screw. Secure with a phillips head screwdriver.

C. Repeat Steps A & B for remaining 3 drawers.

Page 2 of 3