ARCHETYPE LARGE BOX WALL SHELF
WALL MOUNTING INSTRUCTIONS:
The wall mounting hardware included with this shelf is intended for drywall installation only. Be sure to use hardware appropriate for your wall type.
Whenever possible, fasten screws directly into a wall stud.
If you are unsure about your wall type or what mounting method you should use, consult a qualified professional or your local hardware store.
B
A
C
3A. Determine wall mounting location. Please note that box shelf can be mounted horizontally or vertically. Tape wall template into position making sure both holes are level.
B.If attaching directly to a wall stud, do not use the wall anchors. Fasten each screw directly into the stud.
C.Drill a 3/16"diameter hole at each end of the template where indicated.
D.Remove wall template and insert a phillips head screwdriver into the wall anchor and insert into the holes while turning each anchor clockwise. Fully tighten until the anchor is seated flush with the surface of the wall.
E.With a screwdriver, insert the screw into the hole of the anchor. Leave 3/16" of the screw protruding out from the surface of the wall.
D 
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Do not use furniture wax or polish as the wood is finished with a protective clear lacquer.
4Carefully align keyhole hardware on back side of the short panels with the protruding screws in the wall and fit securely into place.
Installation is now complete.
Made in China - r04
Page 2 of 2
Customer Service