BELMONT WORK TABLE WITH STAINLESS STEEL TOP
Thank you for purchasing the Belmont Work Table with Stainless Steel Top. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
HARDWARE
12 - allen | 8 - hex | 8 - flat |
bolts | bolts | washers |
8 - spring 4 - plastic
washers washers
Missing hardware?
Please call 800.606.6387 for replacements.
TOOLS REQUIRED
hex wrench (included) | allen wrench (included) |
COMPONENTS
B
1 - tabletop | A |
|
NOTE: Do not fully tighten the bolts
fixed shelf
A
1 - shelf
4 - legs
leg
B
(2 - labeled A, 2 - labeled B)
1 - crossbar
leg
1Fit notched corners of shelf into1 leg (A) and 1 leg (B) as shown. Loosely attach each leg with 1 hex bolt, 1 spring washer and 1 flat washer. Do not fully tighten bolts.
Made in Thailand - r03 | Customer Service 800.967.6696 Latest instructions available at www.crateandbarrel.com | Page 1 of 3 |