BOULEVARD 4 DRAWER CHEST
x 2
Make sure the wheels face forward and the slot is at back of the
side panel
1Attach middle panel to left side panel with 2 short machine screws, 2 spring washers and 2 small flat washers. Tighten with a phillips head screwdriver.
2With the assistance of another adult, slide the back panel into the slot at the rear of the side panel.
x 2
3Fit dowels of middle panel and back panel into corresponding holes and slot in right side panel. Secure with 2 short machine screws, 2 split washers and
2small washers.Made in China 2004
4Fit bottom panel onto dowels in side panels and bottom of back panel. Secure with 4 long wood screws.
Page 2 of 5
Customer Service