COLFAX MEDIA STAND
A
shelf pin
A
large shelf
B
small shelf
10A) Insert 8 shelf pins at desired shelf heights as shown. Turn shelf pins clockwise to secure.
B) Place 1 small shelf and 1 large shelf onto shelf pins as shown. Make sure shelves are securely supported by each shelf pin.
A 
B 
door front
11A) Fit top of door front into corresponding groove on underside of the top panel as shown.
B) Fit bottom of door front into corresponding groove of bottom panel.
Assembly is now complete.
SAFETY MOUNTING INSTRUCTIONS
For added safety and stability, it is recommended that the wall mounting hardware be installed. For safe mounting, it is essential to use wall anchors appropriate to your wall type (i.e. plaster, drywall, concrete, etc.). Mount to wood studs whenever possible.
A.Insert wall screw (not included) through end of wall strap and into wall as shown.
B.Insert wall screw (included) through end wall strap and into the top back of unit as shown.
Mounting assembly is now complete.
NOTE: If you are unsure about your wall type or what mounting method you should use, consult a qualified professional or your local hardware store.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Do not use furniture wax or polish as the wood is finished with a protective clear lacquer.
NOTE: Insert screws
WALL
wall
strap wall screw
wall screw
(NOTE: Additional screw not included. Please consult your local hardware store.)
Made in China - r04 | Customer Service 800.967.6696 Latest instructions available at www.crateandbarrel.com | Page 4 of 4 |