Crate & Barrel Delavan 62 Media Console Fit, and, and, and, with, with, with, A) Place, as shown, partition, B) Attach, A) Attach, B) Secure, top panel, front frame, front frame, large bolts

DELAVAN 62” MEDIA CONSOLE

1Fit pre-assembled dowels of partition into corre- sponding holes of base assembly, and attach with 2 large screws as shown. Secure, but do not over tighten, the screws with a phillips head screwdriver. Make sure partition is orientated as shown during assembly.

A

A

B

B

2A) Place front frame onto clean, padded surface as shown. Attach base assembly to front frame with 5 large bolts, 5 spring washers and 5 flat washers as shown. Secure, but do not over tighten, bolts with a screwdriver.

B) Attach partition to front frame with 3 small bolts, 3 spring washers and 3 flat washers as shown, using a screwdriver.

A

A

B

B

3A) Attach left and right side panels to front frame with 6 small bolts, 6 spring washers and 6 flat wash- ers. Make sure side panels are orientated as shown during assembly.

B) Secure base assembly to side panels with 4 large bolts, 4 spring washers and 4 flat washers as shown.

A

B

AB

4A) Attach top panel to front frame with 5 small bolts,5spring washers and 5 flat washers as shown.

B)Secure assembly to top panel with 6 small bolts, 6 spring washers and 6 flat washers as shown.

Made in Vietnam - r08 Customer Service 800.967.6696 Latest instructions available at www.crateandbarrel.com Page 2 of 4