ELEMENTS MEDIA TOWER
WALL
NOTE: If you are unsure about your wall type or what mounting method you should use, consult a qualified professional or your local hardware store.
D wallscrew
C plasticanchor
F wall strap
wall A cabinet
bracket screw
12Safety Mounting Instructions
For added safety and stability, it is recommended that the wall mounting hardware be installed. For safe mounting, it is essential to use wall anchors appropriate to your wall type (i.e. plaster, drywall, concrete, etc.). Mount to wood studs whenever possible.
A)Attach wall bracket to top center of media tower using 1 cabinet screw. Secure screw with a screwdriver.
B)Determine the final location of cabinet. Mark position on the wall, approximately 2" below the wall bracket mounted to the back of the cabinet.
C)Drill a hole in the wall stud. If the wall stud is not available, drill a hole in the wall that is slightly smaller in diameter than the anchor. Gently tap the plastic anchor until the flange of the anchor is flush with the wall.
D)Attach remaining wall bracket to the wall by inserting 1 wall screw through the wall bracket and into the wall anchor in the wall. Secure screw with a phillips head screwdriver.
E)Place the unit so the wall bracket on the back edge is aligned with the wall bracket.
F)Lace one end of the wall strap through both brackets, and into the other end of the strap.
G)Pull the strap tightly until secure.
Made in China - r06 | Customer Service 800.967.6696 www.crateandbarrel.com | Page 5 of 5 |