ISAAC FULL, QUEEN OR KING BED
NOTE: Do not over tighten the bolts
headboard back
headboard front
1Remove plastic cover from headboard. Fit headboard front into heabdoard back. With the assistance of another adult, place headboard front and back upside down onto a clean, padded surface as shown. Secure headboard back to headboard front with 10 small bolts, using an allen wrench as shown. Do not over tighten the bolts.
headboard assembly
left side rail
B
| right side |
foot rail | rail |
|
A
2A) Fit brackets of foot rail into left and right side rails as shown. Secure foot rail to left and right side rails with 2 small bolts per side as shown.
B) Attach left and right side rails to headboard assembly with 2 large bolts per side as shown, using an allen wrench.
support
A leg
center support rail
support
A leg
B
3A) Attach support leg to center support rail with 4 small bolts as shown, using an allen wrench.
B) Fit center support rail into brackets of headboard and footboard as shown. Push down firmly to make sure center support rail is securely attached.
NOTE: Make sure straps of slat assembly face down
slat assembly
4With assistance of another adult, carefully align slat assembly with
Made in China - r04 | Customer Service 800.967.6696 Latest instructions available at www.crateandbarrel.com | Page 2 of 2 |