KENTON CUBE WITH SHELF
Thank you for purchasing the Kenton Cube with Shelf. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
TOOLS REQUIRED
Phillips head screwdriver
HARDWARE
8 - cams | 8 - cam | 8 - wood | 4 - shelf pins |
| screws | dowels |
|
Missing hardware? Please call 8 - cam covers 800.606.6387 for replacements.
COMPONENTS
2 - side panels | 2 - end panels |
|
|
| |
|
| 1 - back panel |
(left labeled L, right | (1 labeled top, |
|
|
| |
labeled R) | 1 labeled bottom) |
|
|
|
1 - shelf
A |
|
| x 2 |
Make sure arrow on each cam points towards edge with dowels
B
x 2
1A. Insert 4 wood dowels into the inner holes on the edges of the 2 side panels.
B. Insert 4 cams into the large holes in each side panel. Make sure arrow on each cam points out towards edge with dowels.
Made in China - r04
x 2
2Insert 4 cam screws into each outer hole of the 2 end panels as shown. Secure each screw with a phillips head screwdriver, but do not over tighten.
Page 1 of 2
Customer Service