LANDON 54” MEDIA CONSOLE
OPTIONAL SAFETY MOUNTING INSTRUCTIONS
For added safety and stability, it is recommended that the wall mounting hardware be installed. For safe mounting, it is essential to use wall anchors appropriate to your wall type (i.e. plaster, drywall, concrete, etc.). Mount to wood studs whenever possible.
A)Determine the final location of unit. Mark position on the wall, approximately 2" below the top of unit as shown.
B)Drill a pilot hole in the wall stud. If the wall stud is not available, drill a hole in the wall that is slightly smaller in diameter than the plastic anchor. Gently tap the plastic anchor until the flange of the plastic anchor is flush with the wall.
C)Insert large screw through end of wall strap and through the plastic anchor in the wall as shown.
D)Insert small screw through end wall strap and into the top back of unit as shown.
Mounting assembly is now complete.NOTE: If you are unsure about your wall type or what mounting method you should use, consult a qualified professional or your local hardware store.
wall strap
(NOTE: Insert screws
3/4"-1" from the
edge of the strap) small screw
large screw
plastic anchor
Made in China - r03 | Customer Service 800.967.6696 Latest instructions available at www.crateandbarrel.com | Page 4 of 4 |