Crate & Barrel Loop Queen or King Bed CLEANING AND CARE, Note:, Note:, footboard, slat rolls, center rail, long screws, support legs, short screws, short screws, short screws

LOOP QUEEN AND KING BED

A

B

	3	A) Attach 2 support legs to the underside of the center rail
2 Fit metal tabs of side rails into corresponding slots in	with 2 long screws. Secure, but do not over tighten with a
footboard. Firmly lock each rail into position.	phillips head screwdriver.
	B)	Firmly fit metal brackets of the center rail into corresponding
	brackets in the head and footboards.

A

Note:

Make sure slats bow upwards

Note:

Secure the first and last slats to the assembly before securing the middle.

B

first slats

middle slats

last slats

4A. Unroll slat rolls and lay across the center rails and side rails as shown, making sure slats bow upwards.

B. Locate the first slats about 1/5” from the headboard, and screw the first slats to the support rail with 4 short screws, using a Phillips head screwdriver.

Pull the last slats tight toward the footboard, and secure 4 more short screws to the center rail and side rails.

Using the last 4 short screws, screw the middle slats with holes down to the center rail and side rails.

Assembly is now complete.

CLEANING AND CARE

Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Do not use furniture wax or polish as the wood is finished with a protective clear lacquer.

Made in China r03 Customer Service 800.967.6696 www.crateandbarrel.com Page 2 of 2