PARALLEL BOOKCASE
2Attach remaining side frame with 5 allen head screws. Do not fully tighten the screws.
3Insert 1 tube cap into the open end of each leg. If necessary, gently tap each tube cap into position with a hammer.
4With the assistance of another adult, lift frame assembly into an upright position. Fit slots on the underside of the 5 shelves onto corresponding pins on the side and back frames and press firmly into position.
Made in China - r06
x 20
NOTE:Do not over tighten the screws.
5Secure each shelf into position by inserting 1 short wood screw through each peg of the side frames and into the shelf above. Fully tighten with a phillips head screwdriver.
At this point fully tighten all allen head screws from Steps
1& 2 with the allen wrench.
Page 2 of 3
Customer Service