Crate & Barrel Parker Spirits Cabinet levelers, pull, shelf pins, top panels, small bolts, hinged panel, large screws, small screws, flat washers, spring washers, vertical wine racks, Place

PARKER SPIRITS CABINET

5Place hinged panel onto pre-assembled shelf pins as shown, and secure with 4 large screws.

A

B

6A) Open hinged panel as shown, and secure pre- assembled arm hinge with 2 small screws.

B) Attached 1 pull to hinged panel with 2 small screws.

NOTE: Make sure top panels are aligned. Adjust levelers as necessary.

levelers

7 Attach 2 top panels to assembly with 2 small bolts,

2 spring washers and 2 flat washers per panel as shown. Do not fully tighten the bolts. Make sure top panels are orientated as shown. If the top panels are not aligned, make sure assembly is level and adjust levelers as necessary. At this point, secure but do not over tighten the bolts.

8Fit slots of 5 vertical wine racks into corresponding slots of 2 horizontal wine racks as shown.

Made in China - r05 Customer Service 800.967.6696 Latest instructions available at www.crateandbarrel.com Page 3 of 4