PATERSON BENCH

back panel

right side panel

NOTE: Make sure pilot holes in back panel face outwards during assembly

back panel

4Insert 2 cams and 10 wood dowels into back panel as shown.

NOTE: Make sure the cams in back/side panels are positioned at the bottom during assembly

left side panel

5Fit dowels of back panel into corresponding holes of left and right side panels as shown.

NOTE: Make sure cams in back/side panels are secured to cam screws in top assembly

back/side assembly

top assembly

6With assistance of another adult, carefully fit dowels of back/side assembly into corresponding holes of top assembly. Secure cams.

NOTE: Make sure hole in barrel nut aligns with hole in nearest edge

7Insert 8 barrels nuts into assembly as shown. Using a screwdriver, align hole in barrel nut with holes in nearest edge.

Made in China - r04

Customer Service 800.967.6696 Latest instructions available at www.crateandbarrel.com

Page 3 of 4