Crate & Barrel Paterson Two-Door Cabinet into, base, base, with, Attach, top panel, A) Insert, back panel, small bolts, side panels, large bolts, barrel nuts, phillips head screwdriver

PATERSON TWO DOOR CUPBOARD

NOTE: Do not over tighten the bolts

A

right side panel

left side panel

B

top panel	NOTE: Make sure grooves
	are on the same side during
	assembly

1A) Insert 4 wood dowels into left and right side panels as shown.

B) Fit dowels of left and right side panels into corre- sponding holes of top panel, and attach with 4 small bolts as shown. Secure, but do not over tighten, bolts with a phillips head screwdriver.

back panel

2Insert back panel into grooves of side panels as shown.

B

base

A

B

NOTE: Make sure hole of barrel nut aligns with holes in nearest edge

3A) Insert 2 barrel nuts into left and right side panels as shown. Make sure hole of barrel nut aligns with hole in nearest edge.

B) Fit dowels of assembly into corresponding holes of base as shown. Secure base with 4 large bolts, using a screw- driver. Make sure bolts securely engage in barrel nuts.

left and right door fronts

4Attach 3 hinges to left and right door fronts with 2 hinge screws per hinge. Secure, but do not over tighten, screws with a screwdriver.

Made in China - r04 Customer Service 800.967.6696 Latest instructions available at www.crateandbarrel.com Page 2 of 4