Crate & Barrel Pathway Queen Bed CLEANING AND CARE, slat, slat, center, washers, 2 spring, side rails, side rails, support legs, flat washers, small screws, allen wrench, side slat fitting

PATHWAY QUEEN AND KING BED

A

A

		B
		B
		B
		3 A. Attach 2 support legs to underside of center
2 Align holes in side rails with corresponding holes in		rail as shown with 2 medium screws, 2 spring
		washers, and 2 flat washers per leg.
foot rail. Attach with 2 medium screws,	2 spring
		B. Place center rail into position and attach at the
washers and 2 flat washers per side rail. Fully
		headboard and foot rail with 2 small screws.
tighten with allen wrench.

A

NOTE: Make sure the slats bow upwards.

B

4A) Fit 1 side slat fitting on one end of each slat. B) Align pegs on underside of side slat fittings with corresponding holes on side rails and fit each slat into position. Make sure the slats bow upwards.

5Insert each open slat end into either side of the center slat fitting. Fit pins of each center fitting to corresponding holes in the center rail. Repeat until all slats are securely engaged in each fitting. Assembly is now complete.

CLEANING AND CARE

Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners.

Made in China r06

Customer Service 800.967.6696 www.crateandbarrel.com

Page 2 of 2