TIVOLI CORNER CABINET
C
plastic anchor
mounting bracket
WALL MOUNTING INSTRUCTIONS
For added safety and stability, it is recommended that the wall mounting hardware be installed. For safe mounting, it is essential to use wall anchors appropriate to your wall type (i.e. plaster, drywall, concrete, etc.). Mount to wood studs whenever possible.
A)Attach 2 mounting brackets to assembled unit as shown, using 2 small screws.B)Determine the final location of unit. Mark position on the wall, approximately 2" below the bracket mounted to the back of the unit.
C)Drill a pilot hole in the wall stud. If the wall stud is not available, drill a hole in the wall that is slightly smaller in diameter than the anchor. Insert plastic anchors into hole and secure using a phillips screwdriver.
D)Attach the mounting bracket to the wall by inserting 1 large screws through the mounting bracket and into each plastic anchor in the wall.
E)Place the unit so the mounting bracket on the back edge is aligned with the mounting bracket on wall.
F)Lace one end of the wall strap through both brackets, and into the other end of the strap.
G)Pull the strap tightly until secure.Repeat steps for remaining wall mounting hardware. Wall mounting assembly is now complete.
A
small wall screw
D
large wall screw
F
wall strap
NOTE: If you are unsure about your wall type or what mounting method you should use, consult a qualified professional or your local hardware store.
CLEANING & CARE
Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Do not use furniture wax or polish as the unit is finished with a protective clear lacquer.
Made in China - r06 | Customer Service 800.967.6696 Latest instructions available at www.crateandbarrel.com | Page 3 of 3 |