WINDHAM LOW TWO-DOOR CABINET

left side panel

fixed shelf

right side panel

1Attach right and left side panels onto fixed shelf with 2 wood dowels and 1 medium bolt per side panel as shown. Secure, but do not over tighten, with a phillips head screwdriver.

VIEW FROM

BELOW

B

A

front frame

2With the assistance of another adult, carefully place front frame face down onto a clean, padded surface. Please be cautious of doors opening when placing front frame downwards. A) Insert 6 wood dowels into assembled unit as shown.

B) Fit front frame onto assembled unit, and secure with 6

medium bolts as shown.

C Make sure threaded holes

are horizontally aligned A B

VIEW FROM

BELOW

3A) Insert 7 barrel nuts into assembled unit as

shown. With a screwdriver, align each nut so that the threaded holes are horizontal as shown.

B) Insert 6 wood dowels into assembled unit as shown.

C) Fit bottom panel onto assembled unit and secure with 7 large bolts as shown.

Make sure each leg A/B is attached to corresponding label on bottom panel

A

A

B

B

A

VIEW FROM

BELOW

4Insert 8 wood dowels into assembled unit as shown. Fit 2 leg A and 2 leg B onto assembled unit as shown, and secure with 2 large bolts per leg. Make sure each leg (A, B) is attached to corresponding label

on bottom panel.

Made in China - r03

Customer Service 800.967.6696 www.crateandbarrel.com

Page 2 of 3