Crate Amplifiers BV-120HR Technical Specifications:

Technical Specifications:

Output Power Rating 100 watts RMS @ 5% THD 8 or 16 ohm load, 120 VAC

Gain Channel 1 66dB, tones at “10” @ 1kHz

Channel 2 96dB, tones @ “10” @ 1kHz

Tone Control Range Channel 1 Low 16dB @ 100Hz

Mid 20dB @ 300Hz

High 10dB @ 10kHz

Channel 2 Low 16dB @ 100Hz

Mid 11dB @ 650Hz

High 16dB @ 10kHz

Presence 5dB @ 10kHz

Input Impedance 1M ohm

Maximum Signal Accepted 2.8V peak to peak

Tube Types Preamp 12AX7A (3)

Power Amp 12AX7A (1), 6L6GT/5881 (4)

Line Out Level 1.2V RMS nominal

Power Requirements 120VAC, 60Hz, 180VA

100/115VAC, 50/60Hz, 180VA

230VAC, 50/60Hz, 180VA

Size and Weight 12”H x 30.25”W x 10”D, 50lbs.

Crate continually develops new products, as well as improves existing ones. For this reason, the specifications and information in this manual are subject to change without notice.

The BV-120HR is covered with high-quality, durable red Tolex®. To keep the cabinet looking its best, avoid

abrasive cleansers. Wipe the cabinet clean using a slightly dampened soft cloth. Do not spray cleaners directly

into the amplifier. Never use harsh cleaners on the hardware since they could damage their protective coatings.

P/N 47-631-05 • 06/99

BV-120HR RED VOODOO All Tube Guitar Amplifier

Adivision of St. Louis Music

1400 Ferguson Avenue

St. Louis, Mo 63133