Crate Amplifiers manual Technical Specifications, CA120D Acoustic Amplifier

	CA120D Acoustic Amplifier
Technical Specifications:
Output Power Rating:	120 watts @ <1% THD
Channels 1 & 2: Low:	+/-15dB @ 80Hz
Mid:	+15, -30dBdB from 450Hz – 1.2kHz (Contour)
High:	+/-15dB @ 10kHz
Input Impedance:	3.3M ohm High-Z, 3k ohm Low-Z
Input Sensitivity:	5mV High-Z, 2mV Low-Z
Sens. to Eff Send/Line out:	6mV High-Z, 3mV Low-Z
Max Input Signal:	6V RMS (17V peak to peak)
CD Input: Input Impedance:	22k ohm
Input Sensitivity:	150mV
Max Input Signal:	6V RMS (17V peak to peak)
AuxEff. Return: Input Impedance:	11k ohm
Input Sensitivity:	80mV RMS
Max Input Signal:	6V RMS (17V peak to peak)
Eff Send Out. Impedance:	2.2k ohm
Line Out Out. Impedance:	220 ohm Low-Z, 2.2k ohm High-Z
Feedback Filters:	10Hz to 4.8kHz range, -15dB cut per filter
Internal Woofer:	12” w/polypropylene cone, rubber surround, 45oz magnet, 2” voice coil,
	4 ohms, 175w RMS, 95dB 1w 1m
Internal Tweeter:	High efficiency Piezo, 110dB 1w 1m
Internal Crossover:	Passive type
Power Requirements:	120VAC, 60Hz, 160VA
	100/115VAC, 50/60Hz, 160VA
	230VAC, 50/60Hz, 160VA
Size and Weight:	18”H x 17-1/2”W x 15-1/2”D, 45 lbs.

Crate continually develops new products, as well as improves existing ones. For this reason,

the specifications and information in this manual are subject to change without notice.

www.crateamps.com

©2004 SLM Electronics

A Division of St. Louis Music Co.

1400 Ferguson Avenue

St. Louis, MO 63133

47-942-01 • 021604