Crate Amplifiers FlexWave 65/112 owner manual DSP Section, 19 20

FlexWave65/112 Guitar Amplifier w/DSP and Channel Tracking

The DSP Section

Signal Path

MOD + DELAY + REVERB

EFFECTS

REVERB	MOD	DELAY		POWER
	SLAP		LONG
	FLANGER	MEDIUM
CHORUS	PHASER

CD

INPUT

19 20 21

19.REVERB: Use this control to adjust the amount of digital reverb effect. In its fully counterclockwise position, the signal will be “dry” (without reverb). As you rotate this control clockwise, the amount of reverb increases.

20.MOD: Use this control to select the type of digital modulation effect. In its fully counterclockwise position, the signal will be “dry” (without modulation). As you rotate the control clockwise, you can select from

three chorus settings, three flanger settings, or three phaser settings. The chart below describes these effects.

21.DELAY: Use this control to select the type of digital delay effect. In its fully coun- terclockwise position, the signal will be “dry” (without delay). As you rotate the control clockwise, you can select from three slap settings, three medium delay settings, or three long delay settings. The chart below describes these effects.

Effect Setting	Description
Chorus 1	Chorus with low depth
Chorus 2	Chorus with medium depth
Chorus 3	Chorus with high depth
Flanger 1	Flanger with low depth
Flanger 2	Flanger with medium depth
Flanger 3	Flanger with high depth
Phaser 1	Phaser with low feedback
Phaser 2	Phaser with medium feedback
Phaser 3	Phaser with high feedback
Slap 1	Single short delay with low level
Slap 2	Single short delay with medium level
Slap 3	Single short delay with high level
Medium 1	Multiple repeats with low level and medium length
Medium 2	Multiple repeats with medium level and medium length
Medium 3	Multiple repeats with high level and medium length
Long 1	Multiple repeats with low level and long length
Long 2	Multiple repeats with medium level and long length
Long 3	Multiple repeats with high level and long length
		7