KX-220
Technical Specifications
Output Power Rating |
| 160 watts RMS minimum @5% THD @ 4 ohm internal speaker | |
|
| 220 watts RMS with 4 ohm extension speaker | |
|
|
|
|
Maximum Signal Accepted | Channels 1,2,&3 | Right/mono / Left: 6 volts peak to peak |
|
| Channel 4 | Instrument: 28 volts peak to peak; Microphone: 4 volts peak to peak | |
| Effects Return | Right/mono: 27 volts peak to peak; Left: 27 volts peak to peak | |
|
|
|
|
Nominal Input Impedance | Channels 1,2,&3 | Right/mono / Left: 22k ohm |
|
| Channel 4 | Instrument: 220k ohm; Microphone: 600 ohm | |
|
|
|
|
Gain | Channels 1,2,&3 | Right/mono / Left: 30dB |
|
| Channel 4 | Instrument: 37dB; Microphone: 64dB |
|
| Power Amp | 36dB |
|
|
|
| |
Channel 4 EQ |
| Low: ±10dB @ 50Hz; High: ±10dB @ 10kHz | |
|
|
| |
Master EQ |
| ±12dB @ 40Hz, 100Hz, 225Hz, 625Hz, 1.6kHz, 4kHz, 8kHz, 16kHz | |
|
|
|
|
Line Out/Line In Levels |
| 1 volt RMS typical |
|
|
|
|
|
Input Power Requirements |
| 120 VAC, 60Hz, 205VA |
|
|
| 100/110 VAC, 50/60Hz, 205VA |
|
|
| 230 VAC, 50/60Hz, 205VA |
|
|
|
|
|
Limiter Range |
| 20dB, maximum distortion 1% |
|
|
|
| |
Speaker Specifications | Low Frequency | 15” Crate Custom Design, 2.5” voice coil, 56 oz. magnet | |
| High Frequency | 4”x4” Bullet Horn, 1” voice coil, replaceable phenolic diaphragm, | |
|
| 8 oz. magnet |
|
|
|
|
|
Size and Weight |
| 20.5” H* x 20.5” W x 17.5” D; 73 lbs | (*add 1.5” for casters) |
|
|
|
|
Due to ongoing product development and improvement, the specifications
contained herein are subject to change without notice.
www.crateamps.com
©1999 SLM Electronics, Inc. • A Division of St. Louis Music, Inc.
1400 Ferguson Avenue • St. Louis, MO 63133
