Crate Amplifiers TXB50 ABOUT THE POWER SUPPLY (continued):

ABOUT THE POWER SUPPLY (continued):

The TXB50 may also be powered by using a 12-volt automotive cigarette

lighter adapter, available at most electronic supply stores. Make certain

that the polarity on the adapter matches what is shown below.

Connect the small round end of the adapter to the 12VDC Automobile

adapter jack (#18, page 8), then connect the other end of the adapter

into the vehicle’s cigarette lighter socket. (In some vehicles, the ignition

switch must be in the “on” or “accessory” position to have power at the

socket.) NEVER PLUG THE 15VDC CHARGER INTOTHE AMPLIFIER’S

12VDC LIGHTER PLUG!

When using the DC cigarette lighter adapter, the vehicle’s battery will

keep the amp charged to its own voltage level – if the battery has a 13.5

volt charge, the amp will charge up to 13.5 volts; if the battery is low and

only has a 10-volt charge, the amp will discharge down to 10 volts.

Declaration Of Conformity

#26, Effective 01-01-2001

Manufacturer’s Name: SLM Electronics

Production Facility: 11880 Borman Drive, St. Louis, MO 63146, USA

Production Facility: 700 Hwy 202 W, Yellville, AR 72687, USA

Shipping Facility: 1400 Ferguson Ave., St. Louis, MO 63133, USA

Office Facility: 1400 Ferguson Ave., St. Louis, MO 63133, USA

Product Type: Audio Amplifier

Complies with Standards:

LVD: 92/31/EEC, 93/68/EEC, & 73/23/EWG

Safety: EN60065

EMC: EN55013, EN55020, EN55022, EN61000-3-2,

& EN61000-3-3

Supplementary information provided by your local Sales & Services Office or:

SLM Electronics - R & D Engineering

1901 Congressional Drive, St Louis, MO 63146, USA

Tel.: 314-569-0141, Fax: 314-569-0175