Step 4: Activate the wireless desktop devices

•Make sure that the keyboard and mouse are within 1.8 meters (6 feet) of the RF Receiver.

•Press the Connect buttons on each of your Desktop Wireless 6000 devices, as shown in Step 4, each time you insert batteries.

•Make sure you press the Connect buttons on the keyboard and mouse within 10 sec after you press the Connect button on the RF Receiver.

1.Press the Connect button on the RF receiver, as shown in Figure 2-6.

2.Press the Connect button on the mouse. The Communication LED indicator on the RF receiver blinks green for about 5 sec.

3.Press the Connect button on the keyboard. The Communication LED indicator on the RF receiver blinks green for about 5 sec.

1

2

 

3

Figure 2-6: Activating the Creative keyboard and mouse

To install drivers, refer to "Installing Software" on page 3-1.

Installing Hardware 2-4