3-3 Power Supply

●Gently slide the lens cover to the left as illustrated. A long beep indicates that the camera is turned on.

●To turn off the camera, gently slide the lens cover to the right.

configuration before the camera is turned off unless the "Reset Default" has been selected to restore its factory anticipated settings.

1.Resolution 2. Image Quality 3.Language 4.White balance 5.EV value 6.Frequency 7.PC MODE

3-4 Shutter Button

●When the camera is turned on, the red LED flashes,

and the last recorded image appears on the LCD monitor.

※This camera has a power-saving feature. If there is no

operation on the camera for 60 seconds, the power is turned off to prevent the battery from draining. Please power on camera again.

This camera is designed for 2-step shutter function. A "[ ]" mark will appear in the center of the LCD monitor when the Shutter button is pressed and held half way down. The camera will beep after the Shutter button is pressed down fully; then release the Shutter button to take a picture.

※The following features will automatically save the

9