Installation Sequence

Speaker Placement

1. Read all of the instructions before

installing the speaker system.

2. Using the placement instructions as

a guide, position the satellites, the

center channel speaker and

subwoofer around your computer.

Install the Desktop Stands and

Floor Stands as appropriate. If you

wish to substitute a powered

subwoofer for the subwoofer that

comes with the DTT2500 Digital,

read Substituting a powered

subwoofer page 9.

3. Connect the satellite speakers,

center channel speaker, and

subwoofer to the back of the

Decoder Amplifier.

4. Connect the Dolby Digital output

of your digital program source

(typically a DVD player) to the

6.With the Decoder Amplifier’s power switch “off”, connect the power supply adaptor to the Decoder Amplifier.

7.Turn on the power. Use the SPEAKER TEST mode to position and balance the speakers.

8.You may wish to experiment with speaker placement briefly before concealing the connecting cables and making the installation more permanent.

9.The unit is ready for you to enjoy. Refer to the Quick Reference guide for information about settings for specific program sources like DVD, CDs, Video CD and games.

The Front Satellites. The left front and right front satellites play stereo music, the off-screen sounds of video playback and the front channels of four channel games.

These satellites should be placed to the sides of your monitor (see Diagram A). Be sure to have a clear line of sight from your listening position to these satellites. The satellites intended for front placement have 3 meters (9 feet) of cable.

Install the satellite’s Desktop Stands when using them on the desktop (see page 10).

The satellites may also be hung on the wall behind the monitor using the screw and wall anchors provided (see Mounting The Speakers, page 11).

If you wish to save desktop space, use the hook and loop fasteners to attach the satellite speakers to the sides of the computer monitor (see Diagram B).

The Center Channel Speaker. The center channel speaker provides the on- screen effects and dialog in Dolby Digital, Dolby Surround or Creative Multi Speaker Surround modes. It should be placed as close to the center of your computer monitor as possible.

Dolby Digital input of the Decoder

Amplifier.

5. Connect your normal audio signal

sources via the Line In and Rear In

inputs. An owner of a Sound

Blaster Live! sound card with a

Digital DIN output should use the

supplied cable to connect it to the

Digital DIN input instead.

A

B

7