Creative NX Pro Note:, For Windows 98/98SE and Windows Me only, iii.Follow the instructions on the screen, ii.In the Insert Disk dialog box, click the OK button

If you have a microphone, plug it into your computer’s microphone connector. For further information, please read the documentation for your microphone connector.

5.Place your Creative WebCam NX Pro on top of your computer monitor or other flat surface. For LCD flat panel monitors or notebook computers, use the integrated hinged lever to balance the camera. See Figure 1-2.

USB port

Hinged lever

Figure 1-2: Connecting Creative WebCam NX Pro to your computer

For Windows 98/98SE and Windows Me only

1.Connect the Creative WebCam NX Pro’s USB cable to an available USB port on your computer (Figure 1-2). Windows automatically detects the device.

i.If you are prompted to insert the Windows 98 or Windows Me CD, replace the Creative WebCam NX Pro Installation CD with the appropriate CD.

Note: Windows 98 is available in various editions. Be sure to use the correct edition for your system.

ii.In the Insert Disk dialog box, click the OK button.iii.Follow the instructions on the screen.

Installing Creative WebCam NX Pro 1-3