Creative Comprehensive Guide to Setting Up Your Sound Blaster Audigy 4

SOUND BLASTER AUDIGY 4 SETUP

What You Need

AUX_IN

(a) Sound Blaster Audigy 4 audio card	(b) Installation CD	(c) Digital I/O Module model	(d) Phillips-head screwdriver
		number SB0002 (optional)	(not included)

1	Preparing Your Computer
	1.	Uninstall the drivers and software of any audio card or onboard audio chipset in your computer.
	2.	Turn off your computer.
	3.	Disconnect your computer's power cord from the wall outlet.
	4.	Touch a metal plate on your computer to ground yourself and to discharge any static electricity.
	5.	Remove the computer cover.
	6.	Remove any audio card in your computer.

Product Registration

Registering your product ensures you receive the most appropriate service and product support available. You can register your product during installation or at

www.creative.com/register.

Please note that your warranty rights are not dependent on registration.

Creative Knowledge Base

Resolve and troubleshoot technical queries at Creative's 24-hour self-help Knowledge Base.

Go to www.creative.com, select your region and then select Support.

Customer Support Services & Warranty

You can find Customer Support Services, Warranty and other information in the Installation CD.

Customer Support d:\support\<region>\<language>\support.chm Services

Warrantyd:\warranty\<region>\<language>\warranty.chm

Please keep your Proof of Purchase for the duration of the Warranty period.

User's Guide d:\manual\<language>\manual.chm

(replace d:\ with the drive letter of your CD-ROM/DVD-ROM drive, <region> with the region you are in, and <language> with the language that the document is in).

2	Installing Hardware
	a	(a) Remove a metal bracket

Optional

Keep this document for future reference.

(a) CD-ROM/

DVD-ROM drive

(c)Digital I/O Module (available as an upgrade)

b

(b) PCI slot

Align the audio card with the PCI slot and press the card gently but firmly into the slot

(b)Analog CD audio cable (available separately) for analog CD audio output

AUX_IN

To prevent permanent damage, use only Model SB0002 of the Digital I/O Module (available as an upgrade) with the Audigy 4 audio card.

The use of the WEEE Symbol indicates that this product may not be treated as household waste. By ensuring this product is disposed of correctly, you will help protect the environment. For more detailed information about the recycling of this product, please contact your local authority, your household waste disposal service provider or the shop where you purchased the product

Copyright © 2005 Creative Technology Ltd. Sound Blaster and Blaster are registered trademarks, the Sound Blaster logo, Creative Inspire, Creative I-Trigue, and Creative Multi Speaker Surround are trademarks of Creative Technology Ltd. in the United States and/or other countries. Microsoft, MS-DOS, and Windows are registered trademarks of Microsoft Corporation. Manufactured under license from Dolby Laboratories. Dolby, Pro Logic and the double-D symbol are trademarks of Dolby Laboratories. © 2001 Dolby Laboratories. All rights reserved. All other products are trademarks or registered trademarks of their respective owners.

Do not force the audio card into the slot. If it does not fit properly,

gently remove it and try again.

Installing Software

Installing Sound Blaster Audigy 4 drivers and applications

3	1.	After you have installed your audio device, turn on your computer. Windows
		automatically detects your audio device and searches for device drivers.
	2.	When prompted for the audio drivers, click the Cancel button.
	3.	Insert the Installation and Applications CD into your CD-ROM/DVD-ROM drive. Your
		CD should start automatically. If it does not, follow the steps below:
		i. Start Windows Explorer.
		ii. On the left pane, click the My Computer icon.
		iii. Right-click the CD-ROM/DVD-ROM drive icon, and then click Autoplay.
	4.	To complete the installation, follow the instructions on the screen.
	5.	When prompted, restart your computer.

For Windows 2000 only

You need to enable Compact Disc Digital Audio (CDDA) extraction in Windows 2000.

1.Click Start → Settings → Control Panel.

2.Double-click the System icon. The System Properties dialog box appears.

3.Click the Hardware tab.

4.Click the Device Manager button.

5.Double-click the CD-ROMor DVD-ROMicon.

6.Double-click the name of your drive.

7.Click the Properties tab, and then click the Enable digital CD audio for this CD-ROM device check box to select it.

You can use Creative Diagnostics to test the software and hardware installation. Go to Start → Programs → Creative → Sound Blaster Audigy 4 → Creative

Diagnostics.

PN 03SB061000002 Rev.A

For an unsurpassed audio experience with your Sound Blaster Audigy 4, Creative's multi-channel speakers such as the Inspire and MegaWorks series are second to none.

To find out more, go to

www.creative.com/speakers.