Technical Specifications, General | Creative Labs 202 manual

Technical Specifications

TECHNICAL SPECIFICATIONS

Sample Rates: 44.1, 48, 88.2, 96, 176.4, 192kHz from internal crystal with no sample rate conversion

(Note: 176.4k & 192k sample rates not supported on Macintosh)

Bit Depth: 24-bit I/O, 32-bit processing

USB 2.0 Hi-Speed

Full 24-bit resolution at all sample rates 2 in/2 out channels

Zero-latency direct hardware monitoring (disabled at 176.4/192kHz)

ASIO2, WDM MME, Apple Core Audio and Core MIDI drivers

Anti-Pop speaker protection minimizes noise during power on/off

Ultra-low jitter clock subsystem: <100ps RMS

Type: Balanced E-MU combo mic preamplifier and Hi-Z/line input

A/D converter: AK5385A

Input Impedance: 1.5 Kohms

Max Level: +6.5dBV (+8.7dBu)

EIN: (20Hz-20kHz, 150ohm, unweighted) -127dBu

Signal-to-Noise Ratio: (A-weighted, min gain) 113dB

THD+N: (1kHz at -1dBFS, min gain) -103dB (.0007%)

Gain Range: +60dB

Frequency Response: (min gain, 20Hz-20kHz) +0.0/-0.16dB

Stereo Crosstalk: (1kHz min gain, -1dBFS) < -110dB

Input Impedance: 1 Mohm

Max Level: +12dBV (14.2dBu)

Dynamic Range: (A-weighted, 1kHz, min gain) 113dB

Signal-to-Noise Ratio: (A-weighted, min gain) 113dB

THD+N: (1kHz at -1dBFS, min gain) -101dB (.0009%)

20	E-MU Systems