Creative Labs CB2455 Using Your Headset, Answering a call, Putting a call on, Headset pairings

En_CB2455.book Page 3 Wednesday, June 8, 2005 9:32 AM

	Using Your Headset
Usage	Action
Turning on	Press and hold the Multi-functionbutton for three seconds. The LED turns
headset	blue.
Turning off	Press and hold the Multi-functionbutton until the LED turns red.
headset
Making a call	Make sure that your headset is turned on (it may be in standby mode when
	inactive), dial the number, and then proceed with your call.
Answering a call	If there is an incoming call, your earpiece and mobile phone rings, and your
	headset beeps. Press the Multi-functionbutton.
Ending a call	Press the Multi-functionbutton to end a call. You can also end a call using
	your mobile phone.
Using Voice Dial*	Press the Multi-functionbutton and when you hear a beep, say the voice
	tag.
Using Last	Press the Multi-functionbutton twice within one second.
Number Redial*
Adjusting volume	Press the Volume Increase or Volume Decrease button to gradually
	increase or decrease the volume.
Rejecting a call	Press and hold the Multi-functionbutton for three seconds.
Putting a call on	Press and hold the Volume Increase and Volume Decrease buttons
hold	simultaneously, for one second.
Switching between	Press the Volume Increase and Volume Decrease buttons
calls	simultaneously.
Muting or	Press and hold one of the Volume buttons until the LED alternately blinks
unmuting the	red and blue.
microphone	To unmute the microphone, press one of the Volume buttons.
	Make sure that your headset is turned off. Press and hold both Volume
Clearing all	buttons simultaneously for 20 seconds. The LED alternately blinks red and
	blue. Press and hold both Volume buttons for two seconds. You hear two
headset pairings
	beeps and your headset turns itself off automatically. Charge your headset for
	a few seconds to reset your headset. All current pairings are cleared.

*Some features are available only for certain mobile phones. Refer to your mobile phone’s documentation.

3