NEW |
|
|
| |
| Thermostatic Panel | |||
| Radiator | |||
| from Creda |
| Owners Guide | |
a heating revolutionera |
|
|
| |
|
|
|
| |
ModelNumbers: |
|
|
| |
85301,85302,85303,85304,85305 |
| |||
|
| 85311,85312,85313,85314,85315 |
| |
IMPORTANT INSTRUCTIONS
Retain these instructions for future reference, read them carefully and note also the information given on the heater.
Dimensions (millimetres) |
|
|
|
|
|
|
150 | 150 |
|
|
|
|
|
min |
|
|
|
|
| |
min | rnin | Model | Watt | A | B | |
| ||||||
|
| 85301 | / 85311 | 750 | 444 | 93 |
| 420 | 85302 | / 85312 | 1000 | 614 | 93 |
| 85303 | / 85313 | 1250 | 614 | 93 | |
|
| |||||
|
| 85304 | / 85314 | 1500 | 682 | 93 |
|
| 85305 | / 85315 | 2000 | 852 | 93 |
| 150 |
|
|
|
|
|
150 min
The TPR Heater is designed for wall mounting on the wall brackets supplied. It should only be operated when in the upright position as shown.
All models are splashproof to IP24 standard.
Models 8530.. are fitted with a 24 hour programmable timer.
Before connecting the heater check that the supply voltage is the same as that stated on the heater,
INSTALLATION:
The electrical installation must be carried out by a competent electrician and be in strict accordance with the current National Wiring Regulations (BS7671).
The heater is fitted with a length of flexible cable type H05V
The supply circuit to the heater must incorporate a means for disconnection in all poles in the fixed wiring in accordance with the wiring rules.
WARNING
BATHROOM INSTALLATION:
IMPORTANT - If the heater is installed in a room containing a bath or shower, it must be so installed that switches and other controls cannot be touched by a person using a bath or shower.
WALL MOUNTING:
IMPORTANT - The wall brackets supplied with the appliance must be used. The heater should be positioned observing the minimum clearances stated around the heater.
DO NOT locate the heater immediately below a fixed socket outlet or connection box.
200
Min.
1.Remove wall mounting bracket from back of heater by depressing spring latch at top of each bracket.
2.Fix wall bracket securely to wall through the four screw holes provided.
3.Present heater to wall bracket, and engage lower slots in back with bracket,
4.Raise heater to upright position and push heater onto brackets to engage top latch.
