Installing your Cooker Hood
Wall Mounted Model
Lower Fixings
1.Draw a vertical line on the wall, from the centre of the cooking appliance, up to the ceiling. Check the line is vertical using a spirit level.
2.Put the template provided on the wall paying particular attention to positioning distances (see page 5).
3.Drill two holes (Fig.6 2) and insert wall plugs.
3.Fit two hooks in the drilled holes (Fig.6 4) using screws (Fig.6 5).
Upper Fixing Bracket
1.Draw a horizontal line through the vertical line, 15mm from the ceiling. Check the line is level using a spirit level.
2.Place the chimney support bracket (Fig.6 13) over the line, ensuring the bracket is level. Mark the positions for the fixing screws (Fig.6 14).
3.Drill the two holes for the wall bracket, insert the wall plugs and fit the bracket using the screws provided.
If the hood is to be installed onto a hollow or plasterboard wall, special fixings will be required.
FIXING THE CANOPY HOOD:
1.Remove the metal filter.
2.Hang the rear of the hood canopy on the hooks and adjust the position of the hood
using the adjusting screws (Fig.6 6 & 7).
3.Whilst the hood is positioned, mark the two holes (Fig.6 9).
4.Remove the hood and drill the two holes. Insert the wall plugs, return the hood to the hooks and fix in place with the two screws (Fig.6 10).
Fig.6
6
