Appendix

Troubleshooting Guide

Before you call a repair person for your oven, check this list of possible problems and solutions.

Neither the oven’s display nor the oven operate.

Properly insert the plug into a grounded outlet.

If the outlet is controlled by a wall switch, make sure the wall switch is turned on.

Remove the plug from the outlet, wait ten seconds, then plug it in again.

Reset the circuit breaker or replace any blown fuse.

Plug another appliance into the outlet; if the other appliance doesn’t work, have a qualified electrician repair the outlet.

Plug the oven into a different outlet.

The oven’s display works, but the power won’t come on.

Make sure the door is closed securely.

Check to see if packing material or other material is stuck to the door seal.

Check for door damage.

Press Cancel twice and re-enter all cooking instructions.

The power goes off before the set time has elapsed.

If there has not been a power outage, remove the plug from the outlet, wait ten seconds, then plug it in again. If there was a power

outage, the time indicator will display “ ” Reset the clock and any cooking instructions.

Reset the circuit breaker or replace any blown fuse.

The food is cooking too slowly.

Make sure the oven is on its own 20 amp circuit line. Operating another appliance on the same circuit can cause a voltage drop. If necessary, move the oven to its own circuit.

You see sparks or arcing.

Remove any metallic utensils, cookware, or metal ties. If using foil, use only narrow strips and allow at least one inch between the foil and interior oven walls.

The turntable makes noises or sticks.

Clean the turntable, roller ring and oven floor.

Make sure the turntable and roller ring are positioned correctly.

Using your microwave causes TV or radio interference.

This is similar to the interference caused by other small appliances, such as hair dryers. Move your microwave further away from other appliances, like your TV or radio.

Note :

If the oven is set more than 25 minutes at 80, 90 or 100 percent power level, after the first 25 minutes the power level will automatically adjust itself to 70 percent power to avoid overcooking.

Care and Cleaning

Follow these instructions to clean and care for your oven.

Keep the inside of the oven clean. Food particles and spilled liquids can stick to the oven walls, causing the oven to work less efficiently.

Wipe up spills immediately. Use a damp cloth and mild soap. Do not use harsh detergents or abrasives.

To help loosen baked on food particles or liquids, heat two cups of water (add the juice of one lemon if you desire to keep the oven fresh) in a four-cup measuring glass at High power for five minutes or until boiling. Let stand in the oven for one or two minutes.

Remove the glass tray from the oven when cleaning the oven or tray. To prevent the tray from breaking, handle it carefully and do not put it in water immediately after cooking. Wash the tray carefully in warm sudsy water or in the dishwasher.

Clean the outside surface of the oven with soap and a damp cloth. Dry with a soft cloth. To prevent damage to the operating parts of the oven, don’t let water seep into the openings.

Wash the door window with very mild soap and water. Be sure to use a soft cloth to avoid scratching.

If steam accumulates inside or outside the oven door, wipe with a soft cloth. Steam can accumulate when operating the oven in high

humidity and in no way indicates microwave leakage.

• Never operate the oven without food in it; this can damage the magnetron tube or glass tray. You may wish to leave a cup of water in the oven when it is not in use to prevent damage if the oven is accidentally turned on.

If you have a problem you cannot solve,

please call our service line:

1-800-SAMSUNG(1-800-726-7864)

17

Page 17
Image 17
Creda MR1034 owner manual Appendix, Troubleshooting Guide, Care and Cleaning

MR1034 specifications

The Creda MR1034 is a modern and versatile electric heater designed to provide optimal warmth and comfort in various spaces. With its sleek design and efficient performance, it has become a popular choice for homeowners seeking to enhance their heating solutions.

One of the standout features of the Creda MR1034 is its power output, which typically ranges from 1000W to 3000W, making it suitable for different room sizes. This flexibility allows users to tailor the heating to their specific needs, ensuring an efficient warmth distribution throughout any area.

Equipped with advanced thermostat technology, the Creda MR1034 allows for precise temperature control. The built-in thermostat can monitor the ambient temperature and adjust the heater's output accordingly, maintaining a consistent and comfortable environment. This not only enhances user comfort but also contributes to energy efficiency by preventing overheating.

The heater also features a robust build quality, ensuring longevity and durability. Its construction is designed to withstand daily use while being compact enough to fit seamlessly into any decor. With a lightweight design, it can be easily moved or mounted, providing versatility for various applications, whether it's in a living room, bedroom, or office space.

Another significant characteristic of the Creda MR1034 is its safety features. It is equipped with an overheat protection system that automatically shuts off the heater in case of excessive temperatures, reducing the risk of fire hazards. Additionally, it includes a tilting protection function to prevent accidents if the unit is knocked over.

Furthermore, the Creda MR1034 employs innovative heating technologies such as convection heating, which efficiently circulates warm air throughout the room. This ensures a quick and effective heating response, allowing users to enjoy their desired temperature almost instantly.

In conclusion, the Creda MR1034 is a powerful and efficient electric heater that combines modern technologies with user-friendly features. Its adjustable power output, precise thermostat control, safety mechanisms, and versatile design make it an excellent choice for anyone looking to improve their heating solutions. Whether for personal comfort or energy efficiency, the Creda MR1034 stands out as a reliable option in the world of electric heating.