Care and Cleaning

Before cleaning or carrying out any maintenace on your oven, you must disconnect it from the power supply.

Inside the oven

We recommend you clean your oven each time you use it, especially after cooking roasts. In fact, it is advisable to prevent food residue from building up during cooking: the residue would be re-cooked each time the oven is used and would char and release smoke and unpleasant odours.

Oven exterior

Clean the enamelled or stainless steel exterior surfaces of your oven using a sponge soaked in soapy water, making sure you rinse and dry these thoroughly, without using abrasive or corrosive products which could damage them.

Stainless steel

Rinse stainless steel parts and dry them thoroughly using a soft cloth. Use a specific non-abrasive product to remove tougher stains,

DO NOT use aluminium foil to line the bottom of the oven. To avoid having to clean the bottom of the oven, you may be tempted to line it with some aluminium foil. We strongly advise against this. The aluminium foil sheet in direct contact with the heated enamel coating could melt and damage the enamel coating inside the oven irreversibly.

Rubber Seal

There is a rubber seal surrounding the oven opening which guarantees its perfect functioning. Check the condition of this seal on a regular basis. If necessary, clean it using warm water and dry thoroughly.

DO NOT use abrasive products or objects to do so. Should the seal become damaged, please contact Hotpoint Service (see KEY CONTACTS, back page). We recommend you avoid using the oven until it has been repaired.

How to Remove the Oven Door

The oven door can easily be removed to clean the space between the bottom of the door and the front of the oven. To disassemble the door, proceed as follows:

-open the oven door fully,

-lift up and turn the small levers situated on the two hinges,

-shut the door, but not completely,

-grip the door on the two external sides and pull it towards you, pulling it out of its seat.

Reassemble the door by following the above procedures in reverse order.

1

2

3

Replacing the Oven Lamp

•Disconnect the oven from the power supply by means of the omnipolar switch used to connect the appliance to the electrical mains.

•Remove the glass cover of the lamp-holder;

•Remove the lamp and replace with a lamp resistant to high temperatures (300°C) with the following character- istics:

-Voltage: 230/240 V

-Wattage 25W

-Type E14

•Replace the glass cover and reconnect the oven to the mains supply.

9

Page 8 Page 10
Page 9
Image 9
Creda S036E manual Care and Cleaning
Page 8 Page 10

S036E specifications

The Creda S036E is a state-of-the-art electric storage heater designed to provide efficient and effective heating for different spaces. As part of the Creda range, the S036E combines modern design with advanced heating technologies, making it an excellent choice for residential and commercial use.

One of the main features of the Creda S036E is its impressive heating capacity. With a power output of 3.6 kW, this storage heater is capable of delivering substantial warmth to medium-sized rooms. The heater is equipped with a built-in thermostat that allows users to maintain their desired room temperature, ensuring comfort at all times.

The S036E utilizes a unique high-efficiency heating element that ensures rapid heat-up times and optimal energy usage. This technology not only reduces electricity consumption but also minimizes running costs, making the heater an economical option. Additionally, the unit features a thermal insulation layer that retains heat for longer periods, reducing the need for constant recharging during the night.

Another significant aspect of the Creda S036E is its intelligent control system, which offers programmable settings. Users can customize heating schedules according to their routines, ensuring that the space is only heated when necessary. This advanced feature helps to further enhance energy savings and contributes to more sustainable living.

The design of the S036E is sleek and modern, allowing it to blend seamlessly into various interior styles. It is compact in size, making it easy to install in both wall-mounted and free-standing configurations. Furthermore, the heater is equipped with safety features, including an overheat protection system that automatically cuts off power if the unit gets too hot, providing peace of mind for users.

Durability is another notable characteristic of the Creda S036E. Built with high-quality materials, this heater is designed to withstand the test of time, making it a reliable heating solution. The attractive white finish also ensures that it retains its visual appeal over the years.

In summary, the Creda S036E is a high-performance electric storage heater that combines efficiency, advanced technology, and stylish design. Its features such as programmable controls, rapid heating, and safety mechanisms make it an outstanding choice for anyone looking to improve their heating system while keeping energy costs in check.
Top Page Image Contents