Electrical Connection

Electrical connection

The electrical connection to the mains must be made on the appliance. The power voltage and frequency are as indicated on the rating plate.

WARNING: THIS APPLIANCE MUST BE EARTHED.

Mounting the power supply cable

To open the terminal board:

Using a screwdriver, press on the tabs situated on each side of the terminal board cover.

Pull open the terminal board cover.

To mount the power supply cable, proceed as follows:

Unscrew the cable clamp screw and the contact screws L-N-6.

Fasten the wires beneath the screwheads using the follow- ing colour scheme: Blue (N) Brown (L) Yellow-Green6

Fasten the power supply cable in the corresponding cable clamp and close the cover.

Electrical Connection:

4 2 N L

Voltage Frequency: 230 V-1+N 50Hz

Fuse Section: 16A

Supply cable: 3x1.5mm2

You can connect your oven to the system means of a terminal board. Refer to above information for the minimal cable sections and the calibration of the protective elements according to the connection.

If the appliance is installed with a junction box, an omnipolar circuit breaker - with a minimum contact opening of 3mm - should be installed between the appliance and the mains.

Power cable supply connection to the electrical mains:

We recommend you use a power supply cable which is long enough to allow you to take the oven out of its recess in the event of maintenance operations (only use HAR - H 05 - RRF quality cables fitted with a plug conforming to the regulations in force.

The plug must be accessible at all times.

Unplug the appliance before all operations, even when replacing the oven lamp.

Using the appliance without correct earthing is highly dangerous.

IMPORTANT:

After connecting the appliance to the flexible cable, tighten all the screws on the terminal board.

This appliance conforms to the following EEC Directives:

Low Voltage Equipment 73/23/EEC 93/68/EEC

Electromagnetic Compatibility 89/336/EEC

93/68/EEC

Inner dimensions of the oven:

width 43.5cm

depth 40.0cm

height 32.0cm

Voltage and frequency of power supply:

230-240V~

50Hz

2800-3000W

ENERGY LABEL

Directive 2002/40/EC on the label of electric ovens Norm EN 50304

Energy consumption for Natural convection

heating mode: Convectional

Declared energy consumption for Forced convection Class

heating mode: Fan

15

Page 15
Image 15
Creda S077EE manual Electrical Connection

S077EE specifications

The Creda S077EE is a remarkable electric storage heater designed to offer efficient heating solutions for both residential and commercial applications. This model is tailored to meet the needs of modern living, providing excellent energy efficiency while maintaining user comfort.

One of the standout features of the Creda S077EE is its advanced thermal technology. This unit utilizes high-quality ceramic bricks that heat up during off-peak electricity hours. Once heated, these bricks retain warmth and gradually release it throughout the day, ensuring that your space remains comfortable without the need for constant energy consumption. This capability not only supports energy savings but also reduces environmental impact by taking advantage of lower tariff rates.

The Creda S077EE is designed with a user-friendly interface that allows for easy temperature regulation. It includes a simple control panel, featuring a dial for adjusting the heat output and a built-in thermostat that ensures the ideal temperature is maintained. Users can easily schedule heating periods, giving them complete control over their heating needs, which is particularly beneficial during the colder months.

Safety is another significant aspect of the Creda S077EE. The unit is designed with multiple safety features, including overheat protection, ensuring that it operates safely even during prolonged use. Furthermore, its compact and unobtrusive design allows it to integrate seamlessly into various room sizes and decor styles, making it an aesthetically pleasing addition to any space.

With a nominal output of 1.7 kW and a total storage capacity of 2000 watts, the Creda S077EE efficiently warms spaces up to approximately 11 square meters, making it ideal for small living areas, bedrooms, or offices. Its lightweight construction also makes installation simple and hassle-free.

In terms of build quality, Creda is known for its robust manufacturing standards, and the S077EE is no exception. It features a durable exterior that is both stylish and practical, designed to withstand the test of time. Additionally, the energy efficiency of the S077EE is reflected in its low running costs, aligning well with the growing demand for sustainable heating solutions.

Overall, the Creda S077EE electric storage heater combines efficiency, user friendliness, and safety, making it a top choice for those looking to enjoy reliable, long-lasting warmth without excessive energy costs.