Creda S220E manual To Clean the Inside of Outer and Inner Glass Panels, Clean, dry cloth

Care and Cleaning

TO CLEAN THE INSIDE OF OUTER AND INNER GLASS PANELS

Warning: Always switch your appliance OFF at the mains supply and allow to cool before cleaning.

Fig. 1

Fig. 2

Fig. 3

TWO SCREWS/

WASHERS

DOOR

DOOR OUTER FIXING GLASS &

TAG HANDLE

1. Position top or main oven door as shown in fig. 1.

Note: The door can be wedged open using a towel between the door and the side trim thus leaving your hands free.

2.Grip inner door panel and handle/outer glass assembly. Remove two screws and fibre washers (put to one side) as shown in fig. 2.

3.Pull handle/outer glass assembly at the top outwards while still holding the inner door panel and unhook handle/outer glass assembly at the bottom by lifting handle/outer glass assembly upwards as shown in fig. 3. Take care not to dislodge rubber grommets in bottom of door.

4.Return the inner door panel to the closed position as shown in fig. 4.

Warning: Care must be taken when closing the door inner panel as the door will attempt to snatch shut, without the weight of the handle/outer glass assembly avoid trapping your fingers.

RUBBER GROMMETS

Fig. 4

	5. The inside of inner and outer door glass can now be
	cleaned using a clean, damp cloth and polished using a
	clean, dry cloth.
	6. Refit the handle/outer glass assembly by opening the
	oven door and hold taking care not to trap your fingers,
	see fig. 3. Hook the handle/outer glass assembly back
	into the rubber grommets at the bottom of the inner
	door panel, see fig. 3.
	Fit the handle/outer glass assembly back in position at
	the top ensuring the fixing tags on the handle/outer
DOOR	glass assembly fit inside the door inner panel. While still
INNER	holding door together, refit the two screws and
PANEL
	washers, see fig. 2.
	Never operate the ovens without the outer glass panels cor-
	rectly refitted.

24