Installation

.1. General

The appliance is designed to be mounted on a floor between two adjacent cabinets. The cabinets must be securely fixed to the wall and the cooker securely fixed to the cabinets. This cooker must not be used free standing.

Note: This appliance must NOT be fitted on a platform.

3.Final Installation

a.Ensure that the adjacent cabinets and the gap between them have dimensions in accordance with the diagram.

b.Assemble the plastic plugs provided into the fixing brackets. See diagram.

c.Fix the fixing brackets to the sides of the adjacent cabinets so that the centre line of the brackets are 565mm above the top of the plinth line and the front face of the plastic plug is level with the front face of the cabinet sides. See diagram.

d.Adjust the feet on the cooker to their minimum position, i.e. fully screwed in.

e.Slide the cooker centrally into the space between the cabinets ensuring the following:

i)The gap between the cabinet sides and the cooker is even along the length of the cabinet sides.

ii)The cable is routed away from any vents in the rear panel and is not trapped between the cooker and the wall, adjacent cabinets or under the feet

f.Adjust the feet using an open ended spanner until the bottom of the cooker door is in line with the top of the plinth. Using a spirit level, check that the cooker is level in all directions.

g.Check that the plinth can be fitted. If necessary re - adjust the feet and check that the cooker is level.

h.Open the top oven door and fix the cooker to the brackets through the holes in the side trims.

i.Fix the plinth in position.

j.Ensure that there is a minimum gap of 1mm between the cooker side trim and the adjacent cabinet doors or drawer fronts.

k.If a hob is to be installed directly above the cooker it must not project downwards more than 20mm below the underside of the work top. Any projection of more than 10mm must not project more than 500mm from the wall.

Fig. 5

33

Page 32 Page 34
Page 33
Image 33
Creda S420E manual General, Final Installation
Page 32 Page 34

S420E specifications

The Creda S420E is a highly regarded electric storage heater designed to provide efficient and reliable heating solutions for residential spaces. Renowned for its innovative technology and practical features, the S420E has captured the attention of consumers seeking an economical way to maintain warmth in their homes throughout the colder months.

One of the standout features of the Creda S420E is its advanced heat retention capabilities. The heater utilizes high-quality ceramic bricks that store thermal energy during off-peak electricity hours, releasing it gradually into the room to ensure a consistent and comfortable temperature. This feature not only enhances user comfort but also contributes to energy efficiency. The ability to heat during cheaper off-peak periods allows homeowners to significantly reduce their energy bills, making the S420E an attractive option for those looking to manage their heating costs effectively.

The S420E is equipped with an adjustable thermostat that allows users to set and maintain their desired temperature, ensuring a personalized heating experience. In addition, it features an integral fan that can be used to boost heat distribution, making it particularly effective in larger rooms or spaces where heat needs to be circulated more evenly. The presence of a fan also helps to reduce the time taken to achieve the desired warmth.

Another notable characteristic of the Creda S420E is its compact design. With a minimalistic profile, it can be easily installed in various room configurations without overpowering the space. Its clean lines and neutral color palette allow it to blend seamlessly with home decor, making it not only a practical heating solution but also an aesthetically pleasing one.

Moreover, safety is a significant consideration in the design of the S420E. The heater is equipped with essential safety features, including overheat protection, ensuring that it operates safely throughout its service life. This focus on safety makes it a reliable choice for families and individuals alike.

The Creda S420E represents an ideal balance of efficiency, comfort, and safety. With its innovative technologies and thoughtful design, it continues to be a popular choice among those in search of an effective electric storage heating solution. Whether for a small flat or a larger family home, the S420E delivers warmth and reliability, making it a valuable addition to any heating system.
Top Page Image Contents