Creda TVU1 TVR2 Start and Programmes, Choosing a programme, Unidirectional dryers Model TVU1

Start and Programmes

Choosing a programme

1.Plug the dryer into the electrical socket.

2.Sort your laundry according to fabric type (see Laundry).

3.Open the door and make sure the filter is clean and in place (see Maintenance).

4.Load the machine and make sure items are not in the way of the door seal. Close the door.

5.Choose a drying time, the way you do this depends on the type of dryer you have:

Unidirectional dryers: Model TVU1

Choose a drying time by checking the Drying Guide table for the type of fabric you are drying (see Laundry).

-set the temperature with the HEAT button.

-select a drying time by rotating

the TIMER knob clockwise, slightly past the time that you want to select and counter-clockwise, until the indicator is pointing to the drying time you want.

Reversing dryers: Model TVR2

Choose a drying time by checking the Drying Guide table for the type of fabric you are drying (see Laundry).

-set the temperature with the HEAT button.

-select a drying time by rotating the TIMER knob clockwise, never counter-clockwise, until the indicator is pointing to the drying time you want.

6.Press the START button to begin.

During the drying cycle you can check on your laundry and take out the items that are dry, while the others continue drying. When you close the door again, press START in order to resume drying.

7.About 10 minutes before drying is completed, it enters the final COOL TUMBLE phase (fabrics are cooled), which should always be allowed to be completed.

8.Open the door, take the laundry out, clean the filter and replace it (see Maintenance).

9.Unplug the dryer.

GB

Installation
Description
Programmes	Start and
Laundry
Suggestions	Warnings and
Care	Maintenance
	and
Troubleshooting
Service

7