Installation

Siting the Cooker

mm650 150 mm

150 mm

WARNING – THIS APPLIANCE MUST BE EARTHED.

Your cooker should have been checked to ensure that the voltage corresponds with your supply voltage, this is stated on the rating plate, which is situated on the front of the plinth. The cooker must be connected by a competent person such as one who is NICEIC registered, to suitable double-pole control unit with a minimum rating of 45A and a minimum contact clearance of 3mm, which should be fitted adjacent to the cooker, in accordance with latest IEE regulations.

The power supply cable should conform to B.S.6004 with a conductor size of 6mm2 minimum.

The control unit should be easily accessible in the event of an emergency, but must be within 2 metres of and not directly above an appliance.

This appliance conforms to EN 55014 regarding suppression of radio and television interference.

Access to the mains terminals is gained by removing the rear access cover.

The mains cable must pass through the cable clamp adjacent to the terminal block. Sufficient cable should be used to allow the cooker to be pulled out for servicing.

Ensure that the mains cable is routed away from any brackets affixed to the rear panel and is not trapped to the rear wall when pushing the cooker into position between cabinets.

The height of the cooker can be adjusted by means of adjustable feet in the plinth (900mm - 915mm). Adjust the feet by tilting the cooker from the side. Then install the product into position.

The cooker is designed to fit between kitchen cabinets spaced 500mm apart. The space either side need only be sufficient to allow withdrawal of the cooker for servicing. It can be used with cabinets one side or both as well as in a corner setting. It can also be used free-standing.

This cooker is a type X appliance, as such adjacent side walls which project above hob level, must not be nearer to the cooker than 150mm and should be protected by heat resistant material. Any overhanging surface or cooker hood should not be nearer 650mm.

5

Page 5
Image 5
Creda X152E manual Installation, Siting the Cooker

X152E specifications

The Creda X152E is a highly regarded electric storage heater that combines efficiency, modern technology, and user-friendly design to meet the heating needs of contemporary homes. With a focus on convenience, the X152E is equipped with an array of features that enhance its performance and usability.

One of the standout characteristics of the Creda X152E is its storage capability. The heater utilizes a brick or ceramic core to store heat generated during off-peak electricity hours, ensuring warmth is released consistently throughout the day. This makes it an energy-efficient choice for those who prefer to optimize their electricity use and manage costs effectively.

Another key feature is its programmable timer, which allows users to set specific heating schedules according to individual lifestyles. This flexibility means that the heater warms up spaces only when needed, reducing unnecessary energy consumption. The timer can be easily adjusted via a simple interface, making it accessible for all users.

The X152E also incorporates advanced insulation technology, which minimizes heat loss. The design ensures that once the heater has stored energy, it retains it for maximum efficiency. Additionally, the front air vent can be adjusted based on user preferences, allowing for tailored heating distribution and enhancing comfort levels within the room.

In terms of safety, the Creda X152E is designed with several protective features. A thermal cut-out prevents overheating, while the heater's casing is constructed from flame-retardant materials. This attention to safety is critical, particularly in homes with children or pets.

As for aesthetics, the Creda X152E boasts a sleek and contemporary appearance that allows it to blend seamlessly into various interior designs. Available in different sizes, it accommodates a range of room dimensions while providing an unobtrusive heating solution.

Additional features include a user-friendly digital display for easy monitoring of temperature settings and programming tasks. The unit is also quick and simple to install, requiring minimal maintenance over its lifespan.

Overall, the Creda X152E stands out in the market for its efficient heating capabilities, thoughtful design, and user-centric features. Whether in a small apartment or a larger family home, this electric storage heater delivers warmth, comfort, and convenience, making it a valuable addition to any space.