Installation Instructions
Operational | After installation, check for gas soundness. The supply pressure can be |
Checks | checked at the grill injector. Access to the injector is by first removing |
| the baffle at the front of the grill fastened by two screws. Then remove |
| the fastening screw on the right hand side of the burner and slide the |
| burner off the injector. Ensure that the grill burner is correctly located |
| under the fixing screw on reassembly. |
| Fit the battery. Fit the hotplate burner bodies, enamelled discs and pan |
| supports. Referring to the instructions for use where |
| necessary. |
| 1. Check that the hotplate and grill burners ignite correctly and |
| burn with a steady flame. Check for a steady flame on the |
| low setting. |
| 2. Check that with the oven set to mark 9, the burner ignites at |
| low rate, and then increases to full rate within 60 seconds. |
| Leave the oven full on with the door closed for 10 minutes, and |
| check that when the control is turned to the ‘Slow Cook’ |
| setting that the flame reduces. |
| Instruct the user on the operation of the cooker. |
22
