Crestron electronic CEN-SW-POE-5

Crestron CEN-SW-POE-5 5-Port Power over Ethernet Switch

Connectors & Indicators (Continued)

# CONNECTORS &

INDICATORS

DESCRIPTION

4 48VDC

(1) 4-pin power connector, 48 VDC power

input (external power supply included).

48VDC Connector Pin Assignments

PIN DESCRIPTION

1 +48 VDC

2 +48 VDC

3 Ground

4 Ground

5 Power (1) Yellow LED, indicates 48 VDC power

supplied from the external power supply.

* Due to the inherent voltage drop over copper wire, a maximum of 12.9 W is guaranteed to be

received by the PoE powered device over a cable run length of 328 feet (100 meters).

Installation Guide – DOC. 6694A 5-Port Power over Ethernet Switch: CEN-SW-POE-5 • 9

Contents

Main This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON Contents Page Crestron CEN-SW-POE-5 5-Port Power over Ethernet Switch 5-Port Power over Ethernet Switch: CEN-SW-POE-5 Introduction Features and Functions Four 10BaseT/100BaseTX 802.3af PoE Ports Auto MDI/MDI-X Operation Specifications SPECIFICATION DETAILS Page CEN-SW-POE-5 Overall Dimensions Page Page Page Page Industry Compliance Setup Network Wiring Supplied Hardware DESCRIPTION PART NUMBER QUANTITY Installation Page Hardware Hookup Problem Solving Troubleshooting TROUBLE POSSIBLE CAUSE(S) CORRECTIVE ACTION TROUBLE POSSIBLE CAUSE(S) CORRECTIVE ACTION Reference Documents DOCUMENT TITLE Crestron e-Control Reference Guide Further Inquiries Future Updates Return and Warranty Policies Merchandise Returns / Repair Service 18 5-Port Power over Ethernet Switch: CEN-SW-POE-5 Installation Guide DOC. 6694A CRESTRON Limited Warranty Installation Guide DOC. 6694A 5-Port Power over Ethernet Switch: CEN-SW-POE-5 19 Crestron Electronics, Inc. Installation Guide DOC. 6694A